LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2007 >> Acadia SLT, AWD >> Repair and Diagnosis >> Brakes >> Antilock Brake System, Traction Control System & Stability Control System >> Repair Instructions >> Front Wheel Speed Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying Wheel Speed Sensor Bolt
    GM1861961Courtesy of GENERAL MOTORS CORP.
  1. Install the wheel speed sensor to the steering knuckle.
    NOTE: Refer to Fastener Notice .
  2. Install the wheel speed sensor bolt.

    Tighten:  Tighten the bolt to 9 N.m (80 lb in).

    3. Fig 2: View Of Wheel Speed Sensor Wire, Wire Grommet, Connector And Harness Routing Clips
    GM1861960Courtesy of GENERAL MOTORS CORP.
  3. Install the wheel speed sensor wire harness routing clips (4) and (5) to the suspension strut.
  4. Insert the wheel speed sensor wire electrical connector (2) through the wheel house hole.
  5. Seat the wheel speed sensor wire harness grommet (1) to the wheel house.
    6. Fig 3: Identifying Wheel Speed Sensor Electrical Connector
    GM1861959Courtesy of GENERAL MOTORS CORP.
  6. Connect the wheel speed sensor electrical connector (1).
  7. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  8. If replacing the right front wheel speed sensor, connect the battery positive junction block cables. Refer to BATTERY POSITIVE JUNCTION BLOCK CABLE REPLACEMENT .
  9. If replacing the left front wheel speed sensor, install the air cleaner element. Refer to AIR CLEANER ELEMENT REPLACEMENT .
  10. Perform the Diagnostic System Check - Vehicle .
scientia non olet · About LEMON Manuals