Fastener Tightening Specifications
WARNING: This page is about a different car, the 2007 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Arc Tube Cover Screws | 2 N.m | 18 lb in |
| DRL Resistor Fastener | 12 N.m | 106 lb in |
| Fog Lamp Assembly to the Front Fascia Bracket | 2 N.m | 18 lb in |
| Front Park and Turn Signal and Fog Lamp Bracket | No Torque Required | No Torque Required |
| Headlamp Ballast | 2 N.m | 18 lb in |
| Headlamp Bracket Screws | 9 N.m | 80 lb in |
| Headlamp Leveling Front Suspension Height Sensor Assembly | 9 N.m | 80 lb in |
| Headlamp Leveling Front Suspension Height Sensor Assembly Screws | 9 N.m | 80 lb in |
| Headlamp Leveling Rear Suspension Height Sensor Assembly | 9 N.m | 80 lb in |
| Headlamp Nut | No Torque Required | No Torque Required |
| Headlamp Screws | 6 N.m | 53 lb in |
| Headlamp to Mounting Panel Screws | 6 N.m | 53 lb in |
| High Mounted Stop Lamp to Liftgate Screws | 3 N.m | 27 lb in |
| Tail Lamp to Body Panel Screws | 6 N.m | 53 lb in |