LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2008 >> Acadia SLT, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System >> Repair Instructions >> Object Alarm Module Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Object Alarm Module Replacement

Fig 1: View Of Object Alarm Module
GM1847695Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove the left rear quarter lower trim panel. Refer to Rear Quarter Lower Trim Panel Replacement (Acadia/OUTLOOK with E61) or Rear Quarter Lower Trim Panel Replacement (Acadia/OUTLOOK without E61) or Rear Quarter Lower Trim Panel Replacement (Enclave with E61) or Rear Quarter Lower Trim Panel Replacement (Enclave without E61) .
  2. Remove the liftgate actuator (if equipped). Refer to Liftgate Actuator Replacement .
1 Communication Interface Module Bracket

Procedure

  1. Disconnect the body harness from the bracket as required.
  2. Loosen the bracket fasteners to remove the bracket from the slotted holes.
  3. Disconnect the electrical connectors.
2 Rear Object Alarm Module