LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2010 >> Acadia SLT, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Object Detection System) >> Repair Instructions >> Front and Rear Object Alarm Module Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Front and Rear Object Alarm Module Replacement

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Front & Rear Object Alarm Modules
GM2232003Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the left body side trim panel. Refer to Body Side Trim Panel Replacement .
1 Front And Rear Object Alarm Module Nuts (Qty: 3)
CAUTION: Refer to Fastener Caution .

Tighten:  6 N.m (53 lb in)
2 Front And Rear Object Alarm Module

Procedure

  1. Disconnect the electrical connectors.
  2. For programming and set up, refer to Control Module References
scientia non olet · About LEMON Manuals