Circuit/System Verification

WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Ignition ON.
Verify DTC B101D is not set.
- If DTC B101D is set
1. Replace the B218L Side Object Sensor Module - Left.
2. Verify no new DTCs set and side object system operates properly.
  - If there are new DTCs refer to Diagnostic Trouble Code (DTC) List - Vehicle , or if the system does not operate properly, refer to Side Blind Spot Alert System Malfunction (N America) Side Blind Spot Alert System Malfunction (Except N America) .
  - If there are no new DTCs and the side object system operates properly
- If DTC B101D is not set
All OK