Drain Plug: Service and Repair

Drain Plug Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.




2. Remove the drain plug (2).

3. Remove the fill plug (1).

Installation Procedure




1. Clean and inspect the drain plug and case sealing surfaces.

Caution: Refer to Fastener Caution Fastener Caution.

2. Install the drain plug (2) and tighten to 39 Nm (29 lb ft).

3. Fill the transfer case with gear lubricant to the bottom of the fill plug, or 0.80 L (0.85 qt). Refer to Adhesives, Fluids, Lubricants, and Sealers Fluid Type Specifications.

4. Install the fill plug (1) and tighten to 39 Nm (29 lb ft).

5. Lower the vehicle.