Rearview Camera Replacement

WARNING: This page is about a different car, the 2012 GMC Sierra, 2012 GMC Cab & Chassis Sierra, 2012 Chevrolet Silverado, and 2012 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rearview Camera

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the pickup box endgate latch handle bezel. Refer to Pickup Box Endgate Latch Handle Bezel Replacement (Pickup) , Pickup Box Endgate Latch Handle Bezel Replacement (Utility) .
1	Rear Object Camera Nut CAUTION: Refer to Fastener Caution . TIP: The rearview camera and the rearview control module are replaced as a complete assembly. Tighten 2 N.m (18 lb in)
2	Rear Object Camera Procedure Remove the endgate to assist in removal of the grommet and electrical connector with harness. Refer to Endgate Replacement . Disconnect the electrical connector.

Callout

Component Name

Preliminary Procedure
Remove the pickup box endgate latch handle bezel. Refer to Pickup Box Endgate Latch Handle Bezel Replacement (Pickup) , Pickup Box Endgate Latch Handle Bezel Replacement (Utility) .

Rear Object Camera Nut

CAUTION:

Refer to Fastener Caution .

TIP: The rearview camera and the rearview control module are replaced as a complete assembly.
Tighten
2 N.m (18 lb in)

Rear Object Camera

Procedure

Remove the endgate to assist in removal of the grommet and electrical connector with harness. Refer to Endgate Replacement .
Disconnect the electrical connector.