LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2013 >> Sierra 1500 XFE >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 4.8L, 5.3L, 6.0L, 6.2L - Repair Instructions >> Repair Instructions >> Compressed Natural Gas Control Module Replacement (Fuel Injection) >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (TP2 - Auxiliary Battery) , Battery Negative Cable Disconnection and Connection (Single Battery) .
    2. Fig 1: Fuel Injection Control Module
    GM2921005Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the electrical connector from the FICM (2), by sliding purple connector lock open (1).
    3. Fig 2: Fuel Injection Control Module Mounting Bracket
    GM2920999Courtesy of GENERAL MOTORS COMPANY
  3. Remove the nuts (1) and spacers (2) attaching the FICM to the mounting bracket.
    4. Fig 3: Fuel Injection Control Module Mounting Bracket Bolts
    GM2921002Courtesy of GENERAL MOTORS COMPANY
  4. Remove the bolts (1) attaching the FICM to the mounting bracket.
  5. Remove the FICM from vehicle.
scientia non olet · About LEMON Manuals