LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2013 >> Sierra 1500 XFE >> Repair and Diagnosis >> External Pages >> Different car >> Section 2500 (Programming And Setup - All Systems) >> Repair Instructions >> Front View Camera Module Programming and Setup >> Front View Camera Module Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front View Camera Module Replacement

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 GMC Sierra 3500 HD, 2015 GMC Sierra 2500 HD, 2015 GMC Sierra 1500, 2015 Chevrolet Silverado 3500 HD, and 2015 Chevrolet Silverado 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

If the Front View Camera Module needs to be replaced, the following procedures must be performed:

  1. Connect a scan tool to the vehicle and access Service Programming System (SPS).
  2. Perform the SPS function Front View Camera Module - Programming and follow the on-screen instructions.
  3. Clear DTCs after completing the programming procedure.
    4. NOTE:

    After programming is performed, it is normal to have DTC B1008 4B set until calibration is complete.

  4. Following programming, the module will require calibration. Refer to FRONT VIEW CAMERA MODULE LEARN .
scientia non olet · About LEMON Manuals