Replace and Program the Front and Rear Parking Assist Control Module
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 GMC Sierra 3500 HD, 2015 GMC Sierra 2500 HD, 2015 GMC Sierra 1500, 2015 Chevrolet Silverado 3500 HD, and 2015 Chevrolet Silverado 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
If the K41 Front and Rear Parking Assist Control Module needs to be replaced, the following procedures must be performed:
- Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS)
- Perform the SPS function K41 Front and Rear Parking Assist Control Module Programming and follow the on-screen instructions.
- Perform the SPS function K41 Front and Rear Parking Assist Control Module Configuration and follow the on-screen instructions.
- Clear DTCs after completing the programming procedure.