Rear Differential Clutch Control Module Scan Tool Information
WARNING: This page is about a different car, the 2010 GMC Terrain and 2010 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
Rear Differential Clutch Control Module Scan Tool Data Parameters
| Parameter | System State | Expected Value | Definition |
|---|---|---|---|
| Operating Conditions: Ignition is ON, engine OFF, vehicle stationary | |||
| Battery Voltage | - | Varies | The scan tool displays volts. The scan tool displays the battery voltage monitored by the module. |
| Clutch Control Module Calibration Identification | - | Varies | The scan tool displays the rear differential clutch control solenoid 2 digit matching ID code. |
| Left Front Wheel Speed Sensor | - | 0.0 KPH/MPH | The scan tool displays 0-160 km/h (0-99.5 mph). |
| Left Rear Wheel Speed Sensor | - | 0.0 | The scan tool displays 0-160 km/h (0-99.5 mph). |
| Rear Differential Clutch Solenoid Valve Current | - | 0.0 A | The scan tool displays Amps. The scan tool displays the applied current to the rear differential clutch control solenoid. |
| Rear Differential Clutch System Disable Info | - | Normal Function | The scan tool displays Normal Function/LF wheel speed /RF wheel speed/LR wheel speed/RR wheel speed. |
| Rear Drive Clutch Status | - | Temporarily Limited | The scan tool displays Normal/Temporarily Disabled/Temporarily Limited/Malfunction/Externally Disabled. |
| Right Front Wheel Speed Sensor | - | 0.0 | The scan tool displays 0-160 km/h (0-99.5 mph). |
| Right Rear Wheel Speed Sensor | - | 0.0 | The scan tool displays 0-160 km/h (0-99.5 mph). |
Rear Differential Clutch Control Module Scan Tool Output Controls
| Scan Tool Output Control | Description |
|---|---|
| Rear Differential Clutch Torque Command | This function will command the rear differential clutch torque Up and Down. |