Side Object Sensing Alert Module Replacement

WARNING: This page is about a different car, the 2015 GMC Terrain and 2015 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Side Object Sensing Alert Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .
1	Side Object Sensor Module Procedure Disconnect the electrical connector. For programming and set up, refer to Control Module References . Slide module to release from bracket.

Callout

Component Name

Preliminary Procedure
Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .

Side Object Sensor Module

Procedure

Disconnect the electrical connector.
For programming and set up, refer to Control Module References .
Slide module to release from bracket.