Circuit/System Description
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 GMC Yukon XL, 2015 GMC Yukon, 2015 Chevrolet Tahoe, 2015 Chevrolet Suburban, and 2015 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
The parking assist system can be activated and deactivated by pressing the parking assist switch. The front and rear parking assist control module applies voltage and monitors the parking assist switch signal circuit. The parking assist switch is a normally open switch. With the switch open, voltage seen at the front and rear front and rear parking assist control module is high. When the parking assist switch is pressed, the switch is closed and the signal circuit is pulled to ground. With the switch closed, voltage seen at the front and rear front and rear parking assist control module is low. The front and rear parking assist control module will respond to this by activating or deactivating the parking assist function.