Circuit/System Verification
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify DTC C056D 36 is not set.
- If DTC C056D 36 is set
- Program the K83 Parking Brake Control Module.
- Ignition ON.
- Apply and release the park brake.
- Verify the DTC is not set.
- If the DTC is set, replace the K83 Parking Brake Control Module.
- If the DTC is not set
- All OK.
- If DTC C056D 36 is not set
- Perform the Parking Brake Motor Reset procedure with a scan tool for the Parking Brake Control Module.
- Verify DTC C056D is not set.
- If DTC C056D is set
Replace the K83 Parking Brake Control Module.
- If DTC C056D is not set
- If DTC C056D is set
- All OK.