Circuit/System Description
The lane departure warning system is enabled and disabled through the lane departure switch. When enabled, the lane departure warning indicator will illuminate.
For vehicles without UGN, the switch and indicator are connected to the Frontview Camera Module. The Frontview Camera module supplies a reference voltage to the lane departure switch. When the switch is pressed, the signal circuit is grounded. When enabled, the Frontview Camera Module will illuminate the indicator located in the switch when lane departure warning system is enabled.
With UGN, the indicator and switch are connected to the Active Safety Control Module. The Active Safety Control Module receives input from several modules including the Parking Assist Control Module to provide additional features. Refer to Object Detection Description and Operation (with Rear Park Assist, UD7) Object Detection Description and Operation (with Front and Rear Park Assist, UD5) Object Detection Description and Operation (with Side Blind Zone Alert, UDQ) Object Detection Description and Operation (with Rear Cross Traffic Alert, UFG) Object Detection Description and Operation (with Lane Departure Warning, UFL) Object Detection Description and Operation (with Forward Collision Alert, UEU) Object Detection Description and Operation (with Pedestrian Impact Detection, B3T) Object Detection Description and Operation (with Haptic Signal Motor Seat) Object Detection Description and Operation (with Adaptive Cruise Control, KSG, N America) Object Detection Description and Operation (with Active Safety System, UGN, except N America) Object Detection Description and Operation (with Adaptive Cruise Control, KSG, except N America) Object Detection Description and Operation (with Active Safety System, UGN, N America) for additional information on UGN. The lane departure warning alerts and DTCs are from the Frontview Camera Module with the exception of the indicator DTCs which are sent by the Active Safety Control Module. There are no switch DTCs for vehicles with the Active Safety Control Module.
When the system is operating and can detect the lane markings, the Frontview Camera Module will request via serial data communications that the instrument cluster illuminate the green lane departure warning symbol. If the Frontview Camera Module detects that the vehicle unintentionally crosses a lane marking without the turn signal being used, the module will request the instrument cluster to flash the amber lane departure warning indicator. An audible warning will also sound three times when the amber lane departure warning indicator in the instrument cluster is flashing.