Circuit/System Verification
- Perform the Actuator Recalibration procedure.
- Verify the concern or DTC has been corrected.
- If the concern or DTC has not been corrected
- Verify DTC B1395 is not set.
- If DTC B1395 is set, refer to Circuit/System Testing - DTC B1395.
- If DTC B1395 is not set, refer to Circuit/System Testing - DTC B0223, B0228, B0233, B0408, B0413, or B374A.
- If the concern or DTC has been corrected
- All OK.