Peripheral Human Machine Interface Control Module Replacement (Sedan)

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Peripheral Human Machine Interface Control Module (Sedan)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear window panel trim. Refer to Rear Window Panel Trim Replacement (Sedan)
1	Peripheral Human Machine Interface Control Module Bracket Bolt CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Peripheral Human Machine Interface Control Module Bracket Nut (Qty: 2) Tighten 6 N.m (53 lb in)
3	Peripheral Human Machine Interface Control Module Procedure Disconnect the electrical connectors. Refer to Control Module References for programming and set up procedures, if required.