Installation Procedure
- Install the windshield into the opening. Refer to Adhesive Installation of Windshields .
- Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
- Install the windshield wiper arms. Refer to Windshield Wiper Arm Replacement .
- Install the headlining trim panel. Refer to Headlining Trim Panel Replacement (Crew Cab)Headlining Trim Panel Replacement (Extended Cab) .
- Install the windshield side garnish moldings. Refer to Windshield Garnish Molding Replacement - Left Side , and Windshield Garnish Molding Replacement - Right Side .
- Install the sunshades. Refer to Sunshade Replacement .
- Install the inside rearview mirror. Refer to Inside Rearview Mirror Replacement (With UE1)Inside Rearview Mirror Replacement (Without UE1) .
- Install the front view camera, if equipped. Refer to Front View Camera Replacement .
- Install the inside air moisture and windshield temperature sensor, if equipped. Refer to Inside Air Moisture and Windshield Temperature Sensor Replacement .
- Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
- Close the hood.
NOTE:
Ensure that the windshield spacers are in place for height set.