Circuit/System Verification
WARNING: This page is about a different car, the 2018 GMC Terrain and 2018 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition - On / Vehicle - In Service Mode
- Operate the component:S126 Drive Mode Select Switch - Rotate Left & Rotate Right
Verify the following information is correctly displayed:Drive Mode @ A5 Driver Information Center
- If the component does not work as specified
Refer to Circuit/System Testing - Test 1
- Go to next step: If the component works as specified
- If the component does not work as specified
- Operate the component:S126 Drive Mode Select Switch - Rotate Left & Rotate Right
Verify the following information is correctly displayed:Drive Mode - LED (Light Emitting Diode)@S126 Drive Mode Select Switch
- If the component does not work as specified
Refer to Circuit/System Testing - Test 2
- Go to next step: If the component works as specified
- If the component does not work as specified
- All OK.