LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2019 >> Terrain SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Power Door Lock System And Release Systems) >> Diagnostic Information And Procedures >> DTC B2494: Liftgate Handle Switch Circuit (Without TB5) >> Component Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Testing

WARNING: This page is about a different car, the 2018 GMC Terrain and 2018 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition/Vehicle - Off
  2. Disconnect the electrical connector: S46B Liftgate Unlatch Switch
  3. Test for infinite resistance between the test points: Signal terminal 2 & Ground terminal 1 - The switch is in the open position.
    • If less than infinite resistance 

      Replace the component: S46B Liftgate Unlatch Switch

    • Go to next step: If infinite resistance 
  4. Test for less than 3 ohms between the test points: Signal terminal 2 & Ground terminal 1 - The switch is in the closed position.
    • If 3 ohms or greater 

      Replace the component: S46B Liftgate Unlatch Switch

    • Go to next step: If less than 3 ohms 
  5. All OK.
scientia non olet · About LEMON Manuals