LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2019 >> Terrain SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 610 (Programming And Setup) >> Repair Instructions >> K69 Transfer Case Control Module: Programming and Setup >> Unsuccessful Programming Recovery
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Unsuccessful Programming Recovery

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

If programming a control module is not successful, perform the following procedure:

  1. Verify the control module, data link connector and programming tool connections are secure and the tool software is up to date.
  2. Perform the SPS function: K69 Transfer Case Control Module - Programming

    Verify the control module programming is successful.

    • If the programming is not successful 
    1. Disconnect the battery.
    2. Wait 60 s before proceeding to the next step.
    3. Connect the battery.
    4. Perform the SPS function: K69 Transfer Case Control Module - Programming
      • If the programming is not successful - Replace the component: K69 Transfer Case Control Module
      • Go to next step: If the programming is successful
    5. Perform the scan tool configuration/reset function: Transfer Case Clutch Identifier
    6. Clear DTCs.
    7. All OK.
    • Go to next step: If the programming is successful 
  3. Perform the scan tool configuration/reset function: Transfer Case Clutch Identifier
  4. Clear DTCs.
  5. All OK.
scientia non olet · About LEMON Manuals