LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2019 >> Terrain SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Image Display Camera System) >> Diagnostic Information And Procedures >> DTC B127B: Rearview Camera Input Signal Circuit (IO5/IO6 Without MAH/MBC) >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

WARNING: This page is about a different car, the 2018 GMC Terrain and 2018 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify there is no debris on the B87 Rearview Camera lens and that the bezel and bezel seal are not damaged.
    • If debris is found on the lens 

      Clean the lens using water and a soft cloth. If the lens, bezel, or bezel seal are damaged, replace as necessary.

    • Go to next step: If there is no debris on the lens 
  2. Engine running, parking brake applied, transmission in REVERSE.
  3. Verify the backup lamps are illuminated.
    • Go to next step: If the backup lamps are illuminated 
  4. Ignition ON. Verify P17 Info Display Module displays the home screen and radio information properly.
    • Go to next step: If the P17 Info Display displays properly 
  5. Engine running, parking brake applied, transmission in REVERSE.
  6. NOTE:

    A poor quality image is an image that has flickering, blinking, excessively blue/yellow hue, and/or fog/haze such that it obstructs the driver's view out the rear of the vehicle.

  7. Verify a clear rear vision image is displayed on the P17 Info Display Module.
    • If a clear image is not displayed 

      Refer to Circuit/System Testing.

    • Go to next step: If a clear image is displayed 
  8. All OK.