Circuit/System Verification
WARNING: This page is about a different car, the 2021 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition - On / Vehicle - In Service Mode
- Verify DTC B356A is not set.
- If the DTC is set
- Go to next step: If the DTC is not set
- Cycle the component from the open position to the closed position: Lane Keep Assist Switch
Verify the component turns On and Off: Lane Keep Assist Switch Indicator
- If the component does not turn On and Off
Refer to Circuit/System Testing.
- Go to next step: If the component turns On and Off
- If the component does not turn On and Off
- All OK.