Circuit/System Verification
WARNING: This page is about a different car, the 2021 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON/Vehicle In Service Mode.
- Verify DTC B101E is not set.
- If DTC B101E is set
- Program the K124 Active Safety Control Module.
- Verify the DTC does not set.
- If the DTC sets, replace the K124 Active Safety Control Module.
- Go to next step: If the DTC does not set
- All OK.
- Go to next step: If DTC B101E is not set
- All OK