Circuit/System Verification
WARNING: This page is about a different car, the 2021 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition - On / Vehicle - In Service Mode
- Perform the scan tool control function: Object Detection Alert Indicators - Active & Inactive
Verify the component activates: Right Side Object Detection Indicator & Left Side Object Detection Indicator = On and Off
- If the component does not turn On and Off
Refer to Circuit/System Testing.
- Go to next step: If the component turns On and Off
- If the component does not turn On and Off
- All OK.