LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2021 >> Terrain SLE, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Programming And Setup - All Systems) >> Repair Instructions >> K71 Transmission Control Module or Q8 Control Solenoid Valve Assembly : Programming and Setup (6T40 (MNH, MNK) or 6T45 (MHG)) >> Unsuccessful Programming Recovery
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Unsuccessful Programming Recovery

WARNING: This page is about a different car, the 2020 GMC Terrain and 2020 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

If programming a control module is not successful, perform the following procedure :

  1. Verify the control module, data link connector and programming tool connections are secure and the tool software is up to date.
  2. Ignition - On / Vehicle - In Service Mode
  3. Access SPS and follow the on-screen instructions for the control module : Q8 Control Solenoid Valve Assembly or K71 Transmission Control Module

    Verify the control module programming is successful.

    • If the programming is not successful 
    1. Ignition/Vehicle - Off - For greater than 1 min
    2. Ignition - On / Vehicle - In Service Mode
    3. Access SPS and follow the on-screen instructions for the control module : Q8 Control Solenoid Valve Assembly or K71 Transmission Control Module
      • If the programming is not successful - Replace the component : Q8 Control Solenoid Valve Assembly
      • Go to next step : If the programming is successful
    4. Select : Setup
    5. All OK.
    • Go to next step : If the programming is successful 
  4. Select : Setup
  5. All OK.
scientia non olet · About LEMON Manuals