Removal Procedure
- Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
Release the retaining tabs and remove the battery distribution engine compartment fuse block cover (1).
Battery Positive Cable Nut (1) - Remove
- Battery Negative Cable (2) - Remove
Battery Distribution Fuse Block Nut (1) - Remove [2x]
Wiring Harness Clip (1) - Remove [2x]
- Battery Distribution Engine Compartment Fuse Block (2) - Reposition
Disconnect the electrical connectors and release the wiring harness retainers as necessary.
- Engine Control Module (1) - Remove
- Transmission Control Module (2) - Remove
Engine Control Module Bracket Bolt (1) - Remove [2x]
- Engine Control Module Bracket Nut (2) - Remove
Disconnect the wiring harness retainers as necessary.
- Engine Control Module Bracket (1) - Remove