LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2023 >> Hummer EV 3X >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup - All Systems >> Repair Instructions >> K107B Drive Motor 2 Control Module: Programming and Setup >> Reprogram Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reprogram Control Module

To reprogram an existing K107B Drive Motor Control Module 2, perform the following procedure:

  1. Access the Service Programming System (SPS) and follow the on-screen instructions.
    2. NOTE:

    The K107 Drive Motor Control Module, K107B Drive Motor Control Module 2 and K107C Drive Motor Control Module 3 will be programmed together.

  2. On the SPS Supported Controllers screen, select K107 - Drive Motor Control Module - Programming and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select K107 - Drive Motor Control Module - Setup and follow the on-screen instructions.
  4. Clear DTCs.
scientia non olet · About LEMON Manuals