LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2017 >> G80 3.8, AWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System - 3.8L >> Fuel Line >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Release the residual pressure in fuel line.

    (Refer to Fuel Delivery System - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")

  3. Disconnect the fuel feed tube quick-connector (A).
  4. Disconnect the vapor hose (B) which is connected to the PCSV.
    G11355185Courtesy of
  5. Remove the front-LH wheel, tire and the inner wheel house.
  6. Remove the fuel line protector (A) after removing mounting nuts.
    G11355186Courtesy of
  7. Disconnect the front vapor and fuel tube line quick-connector (A).
    G11355187Courtesy of
  8. Remove the noise barrier (A) after loosening the mounting bolt and nut.
  9. Remove the front vapor and fuel tube line (B).
    G11355188Courtesy of
  10. Remove the fuel tank.

    (Refer to Fuel Delivery System - "FUEL TANK ")

  11. Remove the vapor tube and fuel feed tube line fixing clips (A) by using a common driver.
    G11355189Courtesy of
  12. Remove the fuel line from the bottom of the vehicle.
G11355190Courtesy of
scientia non olet · About LEMON Manuals