Repair Procedures: Inspection

Inspection procedures for A smart cruise control system failure

1. Check the bumper appearance and accidents. (Visual appearance of the vehicle, Maintenance and bumper replacement history) → If the vehicle has been crashed, SCC mounting part is highly likely to be twisted.

   [Alignment problem cases caused by minor collision] 

   Courtesy of

   Courtesy of

   [Normal condition] 

   Courtesy of

   [Poor condition] 

   Courtesy of

2. Check whether the radar sensor cover of the bumper is dirty.

   → If the cover is dirty, SCC is highly likely to be released by the foreign substance during operation.

   [Contaminated case caused by snow] 

   Courtesy of

   Courtesy of

3. After engine starting, check SCC warning massage in the cluster and DTC code. (Refer to DTC INDEX )