Repair Procedures: Installation

Install in the reverse order of removal.
Adjust the alternator belt tension after installation.
(Refer to Engine Mechanical System - "DRIVE BELT ")

Alternator Installation Bolt:

49.0 - 63.7 N.m (5.0 - 6.5 kgf.m, 36.2 - 47.0 lb-ft)
NOTE:
- Supply the engine coolant.
  (Refer to Engine Mechanical System - "COOLANT ")
- Supply the ATF oil.
  (Refer to Automatic Transmission System - "Fluid FLUID ")