Variant Coding Procedure

WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.

■ On-line type on GDS

Turn the ignition switch OFF.
Connect the GDS.
Turn the ignition switch ON without the engine running.
Select vehicle name and airbag system.
Select variant coding mode.
Follow the steps on the screen below.
1. Initial ACU Variant Coding screen
  
  Courtesy of
2. VIN Code entering screen
  
  Courtesy of
3. Variant Coding's proceeding screen-1
  
  Courtesy of
4. Variant Coding's proceeding screen-2
  
  Courtesy of
5. Variant Coding is completed

Courtesy of

NOTE:

This screen is shown when you try variant coding on the SRSCM which has been performed before.

Courtesy of
This screen is shown when communication failure has occurred.

Courtesy of

■ Off-line type on GDS (Use when not connected to the internet)

Turn the ignition switch OFF.
Connect the GDS.
Turn the ignition switch ON without the engine running.
Select vehicle name and airbag system.
Select variant coding mode.
Follow the steps on the screen below.
1. Initial ACU Variant Coding screen
  
  Courtesy of
2. ACU Coding Code entering screen
  
  Courtesy of
3. Rechecking ACU Coding Code entering screen
  
  Courtesy of
4. Variant Coding's proceeding screen-1
  
  Courtesy of
5. Variant Coding's proceeding screen-2
  
  Courtesy of
6. Variant Coding is completed

Courtesy of

NOTE:

This screen is shown when you try variant coding on the SRSCM which has been performed before.

Courtesy of