Repair Procedures: Installation
WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
In the case of the vehicle equipped with immobilizer, perform
"Key Teaching" procedure together (Refer to SMART KEY SYSTEM
"Immobilizer" in BE information).
- To install, reverse the removal procedure.
ECM installation bolt:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lbf.ft)