Repair Procedures: Installation
WARNING: This page is about a different variant/trim than selected.
CAUTION:
- Install the component with the specified torques.
- Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
CAUTION:
- Apply the Sealant (LOCTITE FED546 or equivalent) to the sensor.
CAUTION:
- Insert the sensor in the Installation Hole and be careful not to damage when installation.
- Install in the reverse order of removal.
CVVT Oil Temperature Sensor Installation:
14.7 - 21.6 N.m (1.5 - 2.2 kgf.m, 10.8 - 15.9 lb-ft)