Repair Procedures: Inspection: Toe
| Item | Description |
|---|---|
| A-B < 0 | Positive (+) Toe (Toe In) |
| A-B > 0 | Negative (-) Toe (Toe Out) |
NOTE:
- Toe-in adjustment should be made by turning the right and left tie rods with the same torque
- When adjusting toe-in, loosen the outer bellows clip to prevent the bellows clip from being twisted.
- After the adjustment, tighten the tie rod end lock nuts firmly and reinstall the bellows clip.
- Adjust each toe-into be within the range of ±0.1°.