Repair Procedures: Removal

Turn the ignition switch OFF and disconnect the battery negative (-) cable.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "INTAKE AND EXHAUST SYSTEM ")
Remove the delivery pipe and injector.
(Refor to Fuel Delivery System - "Delivery Pipe")

Disconnect the connector (A), and then remove the CVVT oil temperature sensor (B).

Courtesy of HYUNDAI MOTOR AMERICA

NOTE:

When removing and installing the oil temperature sensor, use a deep socket as shown in the image below.

3/8" drive deep socket (24 mm) with the wall thin and the length less than 75 mm.

Courtesy of HYUNDAI MOTOR AMERICA

[Arrangement of tools for removing oil temperature sensor]

Courtesy of HYUNDAI MOTOR AMERICA

[Installation order for tools]

Insert a 24 mm (0.94 in.) deep socket (A) to the oil temperature sensor.

Courtesy of HYUNDAI MOTOR AMERICA

After connecting other tools as arranged in the above image, insert the tools (A) to socket.

Courtesy of HYUNDAI MOTOR AMERICA