LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2018 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 5.0L >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Removal >> [Bank 2/Intake]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

[Bank 2/Intake]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor.
    G12720396Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals