LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2019 >> G70 2.0T Advanced, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Program (Esp) System >> ESP Control Module >> Repair Procedures >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Installation

  1. To install, reverse the removal procedure.
  2. After installation, bleed the brake system.

    (Refer to Brake System - "BRAKE BLEEDING PROCEDURES ")

  3. Connect the GDS to the data link connector located underneath the dash panel.
  4. Using the GDS, Perform FCA (Smart cuise control system) variant coding.
  5. After replacing the ESP control module execute the "Assembly Check (ECU replacement)" of the additional function to check that the mounting is successful.
G13541029Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals