Check Fuel Pressure Control Valve (FPCV) Resistance
- Ignition switch is turned "OFF" and disconnect fuel pressure control valve (FPCV) connector.
- Measure resistance between High and Low control terminals of fuel pressure control valve (FPCV). (Component Side)
Specification: 1.09 ~ 1.21Ω [20°C (68°F)]
- Is the measured resistance within specification?
YES
- Substitute with a known-good IDB and check for proper operation. If the problem is corrected, replace IDB and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Substitute with a known-good fuel pressure control valve (FPCV) and check for proper operation. If the problem is corrected, replace fuel pressure control valve (FPCV) and go to "VERIFICATION OF VEHICLE REPAIR " procedure.