Repair Procedures: Installation
CAUTION:
- Install the component with the specified torques.
- Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
- Be sure not to apply oil or lubricant to the end of the hoses when connecting the PCSV hose.
CAUTION:
- Use care to keep foreign material out of the valve.
- Install in the reverse order of removal.
Purge Control Solenoid Valve Bracket Installation Bolt: 9.8 - 11.8 N.M (1.0 - 1.2 Kgf.M, 7.2 - 8.7 Lb-Ft)