LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2020 >> G70 3.3T, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Idle Stop & Go (ISG) System - 3.3L >> Battery Sensor >> Repair Procedures >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Repair Procedures: Removal

  1. Turn the ignition switch OFF.
  2. Remove the luggage covering (A).
    G13543422Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the luggage center tray (A).
    G13543423Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the battery negative (-) terminal (A).
  5. Disconnect the battery sensor connector (B).
    G13543424Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the battery sensor by loosening the mounting bolts (C).
    G13543425Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals