Monitor DTC Status
- Connect GDS and select the "DTC Analysis" mode.
- Click the "DTC Status" to check the DTC information.
- Read the "DTC Status" parameter, and Record all DTCs, DTC state and freeze frame data.
- Is the DTC active?
YES
- Perform the "S/W Management" → "Option Treatment" → [Change Power Tailgate Mode] with GDS and change the operating mode to "Field Mode".
NO
- This can occur when the PTL*'s memory is not cleared after the repair.
→ Go to the "Verification of Repair" procedure.
| Component | Name_ETM | ETM |
|---|---|---|
| PTL* | "PTL UNIT" | SD817-1 |