DTC Information And Inspection: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Signal error (when camshaft segment time is too long or short)	Poor connector connection Misadjusted crankshaft and camshaft pulley position External noise signal Target wheel damage Faulty intake CMPS
Enable Condition	Engine speed is higher than 32 RPM
Threshold Value	If the number of reference gaps is more than 2 since the last camshaft edge (low side camshaft output) When a short on the ground side is detected
Diagnostic Time	4 camshaft revolution
MIL ON Condition	2 driving cycles