LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2021 >> G80 2.5T Advanced, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Engine Control System - 3.5L) >> Engine Control Module (ECM) >> Repair Procedures >> Adjustment >> [In the case of installing used ECM]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

[In the case of installing used ECM]

WARNING: This page is about a different variant/trim than selected.
  1. Perform "ECM Neutral mode" procedure with diagnostic tool.

    (Refer to NEUTRALIZING OF ECM Body Electrical System - "Immobilizer System")

  2. After finishing "ECM Neutral mode", perform "Key teaching" procedure with diagnostic tool.

    (Refer to KEY TEACHING PROCEDURE Body Electrical System - "Immobilizer System")



  1. Perform "ECM Neutral mode" procedure with diagnostic tool.

    (Refer to NEUTRALIZING OF ECM Body Electrical System - "Smart Key")

  2. After finishing "ECM Neutral mode", insert the key (or press the start button) and turn it to the IGN ON and OFF position. Then the ECM learns the smart key information automatically.

scientia non olet · About LEMON Manuals