DTC Information And Inspection: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Check for injection errors	Poor connector connection Air leakage in the intake system Improper fuel pressure or dirty fuel Faulty MPI/GDI injectors Faulty HO2S
Enable Condition	Activating the injector driver Engine speed after starting 768 - 960 RPM (depends on ECT at start-up) Catalyst heating completed Multiple injection segment counter over 200seg No cylinder fuel cut-off
Threshold Value	When the injector error rate is more than 0.2
Diagnostic Time	180°
MIL ON Condition	2 driving cycles