LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2021 >> G80 3.5T, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Engine Control System - 2.5L) >> Engine Control Module (ECM) >> Repair Procedures >> Adjustment >> [When installing an ECM with learning experience]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

[When installing an ECM with learning experience]

WARNING: This page is about a different variant/trim than selected.
  1. Perform "ECM Neutral Mode" procedure with diagnostic tool.

    (Refer to Body Electrical System - "IMMOBILIZER SYSTEM ")

  2. After finishing "ECM Neutral Mode", perform "Key teaching" procedure with diagnostic tool.

    (Refer to Body Electrical System - "IMMOBILIZER SYSTEM ")



  1. Perform "ECM Neutral Mode" procedure with diagnostic tool.

    (Refer to Body Electrical System - "SMART KEY ")

  2. After finishing "ECM Neutral Mode", Use a key (or press the start button) and turn it to the IGN ON and OFF position. Then the ECM learns the smart key information automatically.

    (Refer to Body Electrical System - "SMART KEY ")

scientia non olet · About LEMON Manuals