Repair Procedures: Inspection

Information 

• Inspect the connector thoroughly for looseness, poor connection, bending, corrosion, contamination, deformation, or damage.

1. Disconnect the parking switch connector.
2. Turn Ignition "ON", & engine "OFF".
3. Measure the each signal in "P" range or "not p" range.
   SIGNAL CODE DESCRIPTION
   
   

   Signal	P	Not P
   S1	20.3% (10.0 - 38.4%)	79.7% (41.1 - 90.0%)
   S2	79.7% (90.0 - 61.6%)	20.3% (58.9 - 10.0%)