SVM System Input/Output
- Camera input
Category Specification Angle of view Horizontal 192° Vertical 137° Provided function Original wide angle image is provided (No additional functions) Applied position Applied to front/rear/left/right cameras - SVM image display
The images received from the 4 cameras mounted on the vehicle go through the image distortion correction logic and the image merging process. H/UNIT displays these images together with other additional features such as the parking guidelines linked with steering wheel on the AVN screen.
- Parking/view button
It is used as a control input signal to operate the front view mode function with the ignition switch ON.
- Ignition input
SVM controller displays the image only in the IGN1 ON and limits the image display with the SVM OFF in the IGN1 OFF.
SVM controller uses the signal which is input to the IGN pin or B-CAN message routed from the IGPM (gateway) to C-CAN to judge the IGN1 ON/OFF.
- Chassis CAN input (C_CAN)
SVM controller receives the vehicle state information through the C_CAN to determine the operation of SVM major functions.
- Multimedia CAN input/output
Relevant information is processed by receiving the M-CAN signal routed from the IGPM (gateway) to C-CAN.
The routed M-CAN signal communication aims to transmit and receive the below information.