LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2025 >> GV70 2.5T Advanced >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transaxle System Diagnosis >> DTC P0601-00: Internal Control Module Memory Check Sum Error >> DTC Information And Inspection >> DTC Setting Condition
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Setting Condition

Troubleshooting Condition Possible Cause
Main Action 
  • Monitor the Internal
  • Faulty "TCM"

    : Checksum error

Prerequisite Condition 
  • IG ON
  • Power Voltage: Above 10V
Threshold Value 
  • Checksum error
Diagnosis Time 
  • 1time
MIL* 
  • 1st Driving Cycle*
Fail Safe 
  • Holded into 5th gear
  • Teaching/Adaptive Learning: Not allowed
Driving Cycle*: 
: DC
MIL* 
: Malfunction Indicator Lamp
  • When [IG ON→Engine ON→IG OFF→IG ON] is performed, the Driving Cycle* 1time (1DC) is completed.
  • The DTC is confirmed as soon as the fault is detected during the 1st DC, and then 'MIL ON' is output from the ECM*.