LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1989 >> Tracker Base, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Alternator & Regulator >> Bench Testing >> Rotor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Bench Testing: Rotor

  1. Check rotor for open field windings by using an ohmmeter across slip rings. Rotor resistance should be 2.8-3.0 ohms.
  2. Check rotor for shorts to ground by connecting ohmmeter between slip ring and rotor shaft. Ohmmeter should show no continuity. Check slip rings for wear or pitting. Turn rotor on lathe if necessary. Check bearing and replace if necessary.
scientia non olet · About LEMON Manuals